2

2" Semi-Automatic T Screen Filter - 120 Mesh - 110 GPM

4

4" Dual Body Screen Filter - 120 mesh - 395 GPM

3" Semi-Automatic T Screen Filter - 120 Mesh - 175 GPM

was $584.97 Special Price $378.00

3" Semi-Automatic T Screen Filter - 120 Mesh - 175 GPM

Inlet / Outlet 3" MNPT
Screen 120 Mesh
Maximum Pressure 110 PSI
Range of Flow Rate 155-185 GPM
Nominal Flow Rate 175 GPM
Filtration Surface Area 129 in²
Cartridge Diameter 4.7" (118mm)
Cartridge Length 14.9" (378mm)

 

 

Availability: In stock
SKU
RKTS340NSA

The semi-automatic screen filter has a cleaning feature that uses suction nozzles on the inside of the screen cartridge. It comes with a pressure differential indicator that attaches to the inlet and outlet of the filter body. Once the pressure difference between the inlet and outlet is high enough, a red indicator button will pop up letting you know that it is time to clean the filter.

The pressure differential indicator installs into the threaded brass ports on the front of the filter body. The large piece with the red button goes on the left threaded brass insert (inlet side). The other end goes on the right threaded brass port (outlet side). The lower port is still solid plastic underneath but can be drilled out to add a 1/4" NPT pressure gauge to show the outlet pressure.

The cleaning function is very simple and done while the system is running. Once the red indicator button pops up, slowly open the ball valve at the bottom of the body and crank the handle clockwise and counter clockwise a few times. This will raise and lower the suction nozzles in a spiraling motion to pass over the entire inside surface of the screen cartridge. Once the pressure differential indicator button goes back down, the cleaning is done and the bottom valve can be closed again.

Features:

  • Body made of special chemically bonded polymer for durability
  • Non-corrosive stainless steel filter mesh
  • Easy to install & low maintenance
  • Cleaning can be done while in operation
  • 1-1/2" drain valve to flush out all the dirt

Material:

  • Construction: Polypropylene Glass Reinforced
  • Filtering Cartridge: 316 Grade Stainless Steel Screen

Download Specification Sheet

Semi-Auto Filter Drawing

Dimensions - Inches

SizeLHH1H2H3
2"1433.2515.251822.5
3"1436.2515.252125.5

Dimensions - Millimeters

SizeLHH1H2H3
2"356845387457572
3"356921387533648

Spare Parts Available:

  • O-ring Top Crank Spindle (225NSA, 340NSA) 2PCS: RKNS-CRANKORING
  • Differential assembly for semi auto filters.: RKNS-DIFF
  • RKTS-CARTORING (TS230, TS340, TS350, TS225NSA, TS340NSA, RKTS490): RKTSCART-ORING
  • 1-1/2" Single Union PVC Ball Valve FNPT: RK1BV15OT
  • 80 Mesh - Screen Filter Cartridge (RKTS230, RKTS340, RKTS340NSA): RKTS340-CART80
  • 120 mesh - Screen Filter Cartridge (RKTS230, RKTS340, RKTS340NSA): RKTS340-CART
  • 150 mesh - Screen Filter Cartridge (RKTS230, RKTS340, RKTS340NSA): RKTS340-CART150
More Information
Inlet / Outlet 3" MNPT
Screen 120 Mesh
Maximum Pressure 145 PSI
Range of Flow Rate 155-185 GPM
Nominal Flow Rate 175 GPM
Filtration Surface Area 129 in²
Cartridge Diameter 4.7" (118mm)
Cartridge Length 14.9" (378mm)