Munro LP3005B3 Self-Priming Centrifugal Pump – 5 HP, 3-Phase, 3" Ports
was
$4,972.00
Special Price
$3,231.80
The Munro LP3005B3 is a 5 HP 3-phase self-priming centrifugal pump with 3" ports for commercial turf and agricultural irrigation. Drawing from ponds, lakes, streams, or cisterns up to 15 ft below the pump, it delivers 47–120 GPM at 45–70 PSI. The 3-phase motor offers lower operating current and greater efficiency than single-phase equivalents for continuous commercial use.
| Horsepower | 5 HP |
|---|---|
| Phase | 3-Phase |
| Discharge / Suction | 3" / 3" |
| Flow Range | 47–120 GPM |
| Operating Pressure | 45–70 PSI |
| Shutoff Pressure | 75 PSI |
| Max Temperature | 180°F |
| Max Suction Lift | 15 ft |
| Weight | 150 lbs |
| Impeller | Brass |
| Wear Ring | Stainless Steel |
| Body | Cast Iron |
Availability:
In stock
Only 4 left
SKU
LP3005B3
Munro LP3005B3 – 5 HP 3-Phase Self-Priming Centrifugal Pump with 3" Ports
The Munro LP3005B3 is the 3-phase version of the LP3005B, providing the same high-flow self-priming performance with the energy efficiency and motor longevity advantages of 3-phase power. With 3" discharge and suction ports and 47–120 GPM capacity, it is well suited for commercial turf irrigation, pasture watering, and mid-size agricultural operations with 3-phase power available.
Key Features and Benefits
- 3-Phase Motor: Lower amp draw, reduced heat buildup, and longer motor life for continuous commercial operation.
- 3" Discharge and Suction Ports: Minimizes friction loss for efficient high-volume flow delivery.
- 5 HP Output: Handles demanding turf and agricultural flow requirements.
- Self-Priming up to 15 ft: Draws directly from surface water sources without submersible pumps.
- Cast Iron Body: Durable outdoor construction for permanent pump station installations.
- Brass Impeller + SS Wear Ring: Long-lasting corrosion resistance and maintained hydraulic efficiency.
Specifications
| Horsepower | 5 HP |
|---|---|
| Phase | 3-Phase |
| Discharge / Suction | 3" / 3" |
| Flow Range | 47–120 GPM |
| Operating Pressure | 45–70 PSI |
| Shutoff Pressure | 75 PSI |
| Max Temperature | 180°F |
| Max Suction Lift | 15 ft |
| Weight | 150 lbs |
| Impeller | Brass |
| Wear Ring | Stainless Steel |
| Body | Cast Iron |
