63" Tripod Stand for 1-1/2" Rain Guns
Inlet/Outlet | 1-1/2" MNPT |
---|---|
Height | 63" |
Material | Galvanized Steel |
Weight | 31 lbs. |
When inserting the tripod into the ground loosen the center pipe and raise it about 1' then tighten it back up. Insert each leg into the ground individually making sure that the tripod does not move easily. Loosen and lower center piping to be level with ground then re-tighten once again.
63" Tripod Stand for 1-1/2" Rain Guns