Munro LP1502B High-Pressure Self-Priming Pump – 2 HP, 1-Phase
was
$3,069.00
Special Price
$1,994.85
The Munro LP1502B is a 2 HP self-priming centrifugal pump engineered for high-pressure turf and agricultural irrigation. Delivering multi-stage performance from a single-stage design with one brass impeller, it achieves 40–80 PSI operating pressures — well above standard LP series pumps — making it ideal for irrigation systems requiring elevated pressure from pond, lake, stream, or cistern water sources.
| Horsepower | 2 HP |
|---|---|
| Phase | 1-Phase |
| Discharge / Suction | 1.5" / 2" |
| Flow Range | 38–75 GPM |
| Operating Pressure | 40–70 PSI |
| Shutoff Pressure | 80 PSI |
| Max Temperature | 180°F |
| Max Suction Lift | 15 ft |
| Weight | 120 lbs |
| Impeller | Brass (single-stage) |
| Wear Ring | Stainless Steel |
| Body | Cast Iron |
Availability:
In stock
Only 6 left
SKU
LP1502B
Munro LP1502B – 2 HP High-Pressure Self-Priming Centrifugal Pump
The Munro LP1502B is designed for turf and agricultural irrigation systems that require higher operating pressures than a standard single-stage pump provides. Using a unique single-stage design with a brass impeller, it achieves multi-stage-like pressure output (up to 80 PSI shutoff) while maintaining the simplicity and serviceability of a single-stage pump. Self-priming up to 15 ft from ponds, lakes, streams, cisterns, and shallow wells.
Key Features and Benefits
- High-Pressure Output (up to 80 PSI shutoff): Supports elevated irrigation systems, long pipe runs, and high-pressure sprinkler heads.
- Multi-Stage Performance, Single-Stage Simplicity: Achieves elevated pressure without the complexity and maintenance of multi-stage pumps.
- Self-Priming up to 15 ft: Draws directly from surface water sources without submersible equipment.
- Brass Impeller: Corrosion-resistant for clean water agricultural irrigation applications.
- Stainless Steel Wear Ring: Maintains tight tolerances and efficiency over time.
- Cast Iron Body: Built for permanent outdoor pump station installations.
Specifications
| Horsepower | 2 HP |
|---|---|
| Phase | 1-Phase |
| Discharge / Suction | 1.5" / 2" |
| Flow Range | 38–75 GPM |
| Operating Pressure | 40–70 PSI |
| Shutoff Pressure | 80 PSI |
| Max Temperature | 180°F |
| Max Suction Lift | 15 ft |
| Weight | 120 lbs |
| Impeller | Brass (single-stage) |
| Wear Ring | Stainless Steel |
| Body | Cast Iron |
